Extended right of return for standard shipping (DE) until 14.01.2025Extended right of return until 14.01.2025
other
InStockMontana Tech Primer Spray Universal PrimerS2SRX10.9EURhttps://www.modulor.de/en/montana-tech-primer-spray-universal-primer-can-400-ml-for-absorbent-surfaces-st.htmlhttps://cdn.modulor.de/products/s2srx/1_480_480_r_montana_tech_grundierungsspray_universal_primer.jpghttps://cdn.modulor.de/products/s2srx/1_768_768_r_montana_tech_grundierungsspray_universal_primer.jpghttps://cdn.modulor.de/products/s2srx/1_480_480_r_montana_tech_grundierungsspray_universal_primer.jpg23Arts5046Tools & Chemicals5067Primer Sprays15571Montana Tech Primer Spray Universal PrimerstoreaswellEUR
EUR_NETTOEUR9.16InStock

Seals, supports adhesion, improves hiding power

Especially for solvent-sensitive and highly absorbent substrates

Can be used indoors and outdoors

Location in StoreG1F24B
Article No.3017867-ST
MaterialNitro combination
Surfacewhite, semi-gloss
Propertiesfast drying, can be sanded and painted over
EquipmentFlat Jet Medium Cap

One for all! The Montana Tech primer spray Universal Primer, specially developed for solvent-sensitive and highly absorbent substrates, is made for you if you are looking for a primer that you can use on numerous materials. Whether wood, metal, paper, cardboard, concrete, ceramics or leather - the primer seals your surface, optimizes the adhesion and opacity of paints and varnishes and protects against weathering. For this purpose, the primer bonds with both the substrate and the applied paint layer.

We advise you to carry out a preliminary test on a non-visible area to check whether the substrate and the primer are compatible. If the answer is yes, you can start:

Make sure the substrate is clean and free of dust, grease and rust. If possible, wear a respiratory mask when working. Shake the spray can well for 2 to 3 minutes before use. Then apply the primer in a thin layer. Let the result dry for 3 to 4 minutes and repeat the process. Make sure that the layer you are overcoating is not completely dry - this will improve the adhesion of the tech spray. After about 24 hours, the Universal Primer is fully cured and you can sand it down or paint over it with synthetic nitro or acrylic paints, for example. Here, too, a preliminary test is recommended. The product is suitable for both interior and exterior use.

Gefahr, (VOC-Gehalt = 87,00 %; 679,0 g/l), 2-Methoxy-1-methylethylacetat = <2,5%, Aceton = 25-<50%, Butan (enthält < 0,1% Butadien (203-450-8)) = 5-<10%, Cellulosenitrat = 2,5-<5%, Ethanol = <2,5%, Isobutan (enthält < 0,1% Butadien (203-450-8)) = 2,5-<5%, Maleinsäureanhydrid = ≤0,5%, N-Formylmorpholin = ≤0,5%, Propan = 10-<12,5%, Titan(IV)-oxid = <2,5%, Trizinkbis(orthophosphat) = <2,5%, Xylol (Isomerengemisch) = <2,5%, n-Butylacetat = 10-<12,5%, Aerosol 1, Aquatic Chronic 3, Eye Irrit. 2, STOT SE 3

Hazard warnings
  • EUH066: Repeated exposure may cause skin dryness or cracking.
  • EUH208: Contains (name of sensitising substance). May produce an allergic reaction. (EUH08 may be omitted if EUH204 or EUH205 has to be applied.)
  • EUH211: Achtung! Beim Sprühen können gefährliche lungengängige Tröpfchen entstehen. Aerosol oder Nebel nicht einatmen.
  • H222+H229: Extrem entzündbares Aerosol. Behälter steht unter Druck: kann bei Erwärmung bersten.
  • H319: Causes serious eye irritation.
  • H336: May cause drowsiness or dizziness.
  • H412: Harmful to aquatic life with long lasting effects.
Safety instructions
  • P101: If medical advice is needed, have product container or label at hand.
  • P102: Keep out of reach of children.
  • P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
  • P211: Do not spray on an open flame or other ignition source.
  • P251: Do not pierce or burn, aven after use.
  • P260: Do not breathe dust / fume / gas / mist / vapours / spray.
  • P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50°C / 122°F.
  • P501: Dispose of contents / container to …
Downloads

Free standard delivery within Germany and free collection from Modulor in Berlin for orders over 79 €.

5,95 € shipping costs, if order value is less than 79 € (DE)

2,95 € for pick-up at the store in Berlin, if order value is less than 79 €

 

Express and forwarding shipping

From 19 € express surcharge you will receive your order particularly quickly with standard shipping within Germany.

From 69€ is the cost of shipping within Germany. You can recognize articles with forwarding shipping in the store by the truck symbol .

 

Especially for Berlin

From 34.90 € courier shipping for standard and forwarding goods.

  • Free returns for standard shipping within Germany
  • Extended, voluntary return policy of 30 days for complete, undamaged goods in their original packaging
  • You are responsible for the cost of returns for forwarding goods and returns from a country outside Germany

 

Excluded from returns

Excluded from returns are sections of rolled goods, cut-to-size pieces and other goods made especially for you, as well as used goods, newspapers, magazines and periodicals, Modulor vouchers and items that we do not carry in our range but have ordered at your request.

Good to know: The furniture variants in our configurators that can be delivered quickly are not cut to size, but standard formats that can be returned.

Montana Tech Primer Spray Universal Primer

Can 400 ml, for absorbent surfaces
(27,25 €/liter)incl. VAT / excl. shipping
10,90 €
(27,25 €/liter)
incl. VAT / excl. shipping
Standard shipping free from 79€ (DE)Free 30-day return (DE)