If you think that life could do with an extra dose of glitter, take matters into your own hands! With the plottiX GlitterFlex thermal transfer film, you can decorate T-shirts, sweaters, bags and many other textiles with glittering accents.
Simply cut the motifs of your choice from the 30 x 30 cm sheet. If you are using a Silhouette cutting plotter, select blade setting 3 and set the contact pressure to 33. As the condition of your blade has a decisive influence on the result, it is advisable to carry out a preliminary test.
Transferring the film
To transfer the film to the fabric, you can either use an iron and a hard, flat surface or a transfer press. In both cases, start by pre-ironing your fabric for about 5 seconds. Once you have placed the motif and covered it with baking paper, you can start ironing it on. The pressing temperature should be 155 °C and the pressing time should be around 10 seconds.
Tip: Turned inside out, you can wash your result at up to 40 °C. The lower the selected temperature, the better.
Please note: The size of the film may vary by up to 2% for technical reasons.